Spirit FBL Controller
Made in the Czech Republic
Spirit is a device for stabilizing R/C models such as flybarless helicopters. Spirit features include electronic paddle simulation, vibration logging and support for various Tx/Rx types as well as  for those who want to continue using a mechanical flybar. Thanks to flybarless mechanics, the system improves efficiency and maneuverability of a helicopter and its stability while also extending flight times. Because Spirit uses the most advanced technology, your model can be controlled very precisely even under harsh conditions such as strong winds while maintaining a constant pirouette rate. The Spirit Flybarless System is perfect for pilots of all skill levels and all helicopter disciplines including use on flybarred machines. With Stability Mode, the helicopter will return to an upright level attitude whenever the sticks are released or, with the flick of a switch, the helicopter will level and climb in either of two Rescue Modes.Spirit accepts all current servo types including 1520us, 960us, and 760us at anywhere from 50Hz to 560Hz. All current swashplate variants are also supported. The machined, anodized aluminium case speaks to the quality of the product. With one of the smallest footprints available, the Spirit is a match for machines from 250mm to 800mm.
With support for PWM, Futaba S-BUS, PPM, Spektrum DSM2/DSMX, Jeti EX Bus, and UDI/SRXL/SUMD, you can fly the Spirit Flybarless system with any current radio system. Spirit can be used for all electric or combustion powered helicopters.

Features:
-CNC aluminium case
- Flight Log with recorded events
- Jeti DC/DS radio system integration & Wireless programming
- Easy configuration with direct USB connection and setup wizard
-  Flybar Paddle mechanics support
- Flybarless Paddle simulation
- Vibration Spectrum analysis for model diagnostics
- BEC Tester with load verification
- 32bit ARM processor a 6-axis MEMS sensor
- Support for PWM, Futaba S-BUS,PPM, Spektrum DSM2/DSMX,Jeti Ex-BUS & Frsky integration, SRXL/SUMD/UDI  receivers
- 3 programmable banks allow for separate setups
- Govenor for Electric, Nitro or Gas
-Smartphone or tablet support via Bluetooth
- Made in the Czech Republic
The Spirit can be updated anytime there is a change to the firmware. Adjustments can be made to the machines flight characteristics using the software and the profile can be saved to share or reload later.
Technical specifications:
- Dimensions: 32mm x 26mm x 14mm
- Supply Voltage: 3 - 15V (2S Li-Poly compatible)
- Maximum Roll & Pitch Speed: 2000°/s
- Maximum Tail Speed: 2000°/s (typical)
- Servo Frame Rate: 50Hz - 560Hz selectable
- Tail Servo Output: 1,52ms/0,96ms/0,76ms (narrow pulse) selectable
- Weight: 19g (without cable loom)
Included:
(1) Spirit Flybarless System
(3) Cables for Receiver Connection
(1) Mounting Tape
(1) Spirit USB Adapter
All future updates are free. You will never have to pay, unlike some of the other controllers
$240
Spektrum Satelite adapter
$14.70
Bluetooth adapter
$29
Futaba S-Bus adapter
              $13.50
Spirit Pro

    Paddle simulation with inexpressible feeling
    Paddle mechanics support
    Extreme vibration immunity for all helicopter types
    Spectrum analysis for model diagnostics
    Flight log with recorded events
    Easy configuration with setup wizard
    Smartphone or tablet support via Bluetooth
    JETI-Control with transmitter integration
    Available for Windows, OSX, Linux and Android

        

    Stabilisation for scale pilots and beginners
    Reliable, full-featured rescue system
    Integrated Bank Switching
    Governor for Electric, Nitro and Gasser Helicopters
    BEC tester with load verification
    Support for PWM, Futaba S-BUS, PPM,
    Spektrum DSM2/DSMX, Full JETI Duplex integration,
    SRXL/SUMD/UDI/X-Bus receivers
    Support for all servo types:
    1520/960/760
µs @ 50 - 560Hz
    Support for CCPM 90/120/135/140°
$260

    CNC milled, anodized and sandblasted enclosure
    Color: Aluminium satin
    Dimension: 33x32x14mm, weight: 20g
    Power supply: 3 - 15V @ 25mA
    Operating temperature: -10
°C to 60°C
    Latest generation, Ultra Fast
    32bit ARM processor: 210 DMIPS
    MEMS sensor with 9-axis fusion
    (rotation to 2000°/s !)
    Gold plated PCB with Pb-Free soldering
    Integrated S-BUS Inverter
    2x native Spektrum connectors
    3x connector for power supply, 5x for servos
Spirit WiFi Link Module
Spirit WiFi-Link
Parameters: Power supply: 3.3V - 15VWeight: 7gDimension: 21x32x5.5mmModes: AP, AP+Client, ClientStandard: 802.11b/g/nEncryption: Open, WEP, WPA, WPA2Configuration: Web InterfaceSupport for Firmware UpdatesEmbedded Web based Spirit Settings!
Connect your Spirit unit anywhere.Create the Spirit network!
No need for any driver. Just Plug & Play.Works with Android devices, Apple iPhone, iPad and PC software (from v2.0.2)!

$29
Spirit Aero software is now available for planes. Download the free software from the site below.
It can be loaded onto any of the Spirit FBL Gyro units